Water damage to your home or business can be caused in various ways. It may occur gradually through slightly dripping pipe fittings as well as a small crack in your foundation, or it could possibly occur quickly with damaged water pipes ( like may take place in the winter) or possibly a hole in the roofing caused by a hurricane. Regardless of the way it takes place, it’s a problem that should be handled at once. The more time the wetness is left in place, the more damage it will do.
The water which causes the destruction is usually put in 3 different categories.
Category 1 – Clean/Sanitary water
Category 2 - Slightly contaminated and may cause health issues
Category 3 - Highly contaminated and can lead to serious illness or death.
For category 1 water damage, the home or business owner may be able to tackle it themselves when it is within a little area. Then again, when it is in a large space, or maybe is a Category 2 or 3, it could be time to call in an expert. The opportunity for additional damage, or even sickness is a possibility. Even so, if the home or business owner still wants to handle the condition themselves, below are a few things that should be performed without delay..
1) The very first thing to do when water damage is spotted is always to switch the electricity off. Water and electrical power certainly are a deadly pair. Stop the flow of water in the event that it’s still occurring. You simply can’t start clean-up until this is done. You might have to cut off a primary valve.
2) Now, begin cleaning out the water. It is important to get all of the water removed as you can as quickly as possible, or you will have an ideal area for mildew to develop and bring about even more problems. If you think it’s a category two or three you should be wearing rubber gloves plus a face mask.
3) When you have as much water out as you really feel you possibly can, you need to bring several heavy duty fans to the location and put all of them to work drying up the moisture. They will need to remain going for as long as there is even a slight amount of wetness.
4) Assuming you have damage you know can not be fixed like saturated drywall, warped or perhaps ruined floor covering or carpet, it must end up being taken out; it still has lots of moisture content and it is only in the way.
5) When you’re positive the wetness problem is resolved and all of the damaged items are outside the building and the location is clean, It is time to summarize the destruction. You’ll still have to call in an expert to help look for mildew, deodorize and sanitize, as well as examine electrical wiring in the event that it was damaged
Keep in mind all through this process that the KEY to water damage restoration is getting all the moisture out so more damage can’t occur.
Related posts: