Determine the Humidity of Your Home Immediately!

Is the air too dry inside your house or in your place of work?

The correct humidity level is quite important in the heating season.

Relative Humidifer is an important issue for numerous reasons. It affects how comfortable we feel. When it’s excessively dry, we are unable to stay hot despite how high we put the thermostat. It may even influence the capacity of some people to breathe. Humidity levels also impact the cost of heating because lower humidity levels necessitate higher temperatures in order for us to feel comfy.

Indoor humidity levels are also thought to be related to the occurrence of colds and allergic reactions. And excessive humidity can result in unwanted mould growth along with damage and discoloration of window sills, walls, and other building components.
So for a number of different reasons people pay more attention to the indoor relative humidity levels during the heating season.

Most folks don’t actually know what relative humidity is. A simple but non-scientific explanation is that it is the amount of water vapour in the air.

Your own Humidifer
A frequent practice of measuring indoor humidity is to purchase a little tool at your local hardware store to help you figure it out. These tools are designed to sit on a table or shelf and are approximately three inches square in size. They usually sell for less than $20.

Personally, I find that these tools are frequently imprecise, compared to a better quality, commercial device.The devices I tested were not off by a couple of percentage points. Each of these was incorrect by a large amount!

This same apparatus frequently indicates a “comfort zone,” which is intended to specify the temperature and relative humidity you will feel most cosy. There is a quick, free, and specific way to assess your indoor humidity. It doesn’t give you a percentage of humidity, but it does specify if there’s too much humidity, or not enough.

Keep in mind that mould thrives in a lot of humidity. But, not enough humidity, and you’ll feel uncomfortable.

I have tested this technique against the commercial indoor air quality device I use and found it to be incredibly precise in indicating when the humidity level is excessively high or too low.

So what is this method? It simply requires you to look for two things.

Check out the windows in your house. Condensation on and around your windows indicates a high humidity level. We’re not talking one or two drops.We’re talking about a lot of moisture so it runs down the glass and develops into little puddles on the window sill.

When this happens, your humidity is too high! When you continue to allow this high humidity level, you are promoting mould development by providing the right environment. You will absolutely see mould appearing in this environment.

You might see water accumulating on the windows in one room of your house, but not in another. For example, your bathroom} window has water regularly developing on the sill while other windows in the house stay dry. Lots of humidity in your bathroom might be the result of not turning on the exhaust fan long enough after a bath or shower. Other areas of the house remain dry.

So now you know how to determine if there is too much humidity in your house. What about too little?

To figure out if it’s overly dry, you hunt for another straightforward, yet accurate sign. Static electricity. Do you get static electric shocks as you move across the carpet and contact something metal? Is it out of the question to comb your hair without experiencing a few strands stick straight out? Do you need loads of hair spray? Does the cat’s fur stick up if you pet him?

These are all signals that it’s too dry within your house. It’s suggested that you raise the level of humidity.

Related posts:

1. Preventing Basement and Crawlspaces Mold
2. Do It Yourself Home Mold Testing Kits
3. Mold Spores In Your Home
4. How can I check for mold in my home?
5. Cleaning mold